引用本文:乔记阳,蒋大海,胡 欢,等.基于奇异值分解的直流输电电压缓冲装置DCBM10A缓冲时间的测试方法[J].电力系统保护与控制,2016,44(10):151-154.
QIAO Jiyang,JIANG Dahai,HU Huan,et al.Testing method of buffer time to the voltage buffer device DCBM10A based on singular value decomposition[J].Power System Protection and Control,2016,44(10):151-154
【打印本页】   【下载PDF全文】   查看/发表评论  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 6159次   下载 2632 本文二维码信息
码上扫一扫!
分享到: 微信 更多
基于奇异值分解的直流输电电压缓冲装置DCBM10A缓冲时间的测试方法
乔记阳,蒋大海,胡 欢,周绍元,周 琦,王晓辉
(许继电气直流输电系统公司,河南 许昌 461000)
摘要:
DCBM10A电压缓冲装置必须在规定的时间内为后继负载提供持续电能,精确计算装置放电起止时刻非常重要。首先通过理论推理建立了电容放电的状态方程。接着介绍了SVD奇异值分解理论并用此理论对此方程进行了研究并计算得到了装置放电时刻。然后选取Marr小波用小波变换模极大值理论处理缓冲信号。对比分析了两者的结果,体现了SVD理论解决此问题的优越性。最后搭建实验平台用实验证明了此方法的有效性。
关键词:  直流输电  电容放电时间  Hankel矩阵  奇异性信号  SVD分解
DOI:10.7667/PSPC151112
分类号:
基金项目:国家高新技术研究发展计划(863计划)(2015AA 050101)资助
Testing method of buffer time to the voltage buffer device DCBM10A based on singular value decomposition
QIAO Jiyang,JIANG Dahai,HU Huan,ZHOU Shaoyuan,ZHOU Qi,WANG Xiaohui
(XJ Electric Co., Ltd., Xuchang 461000, China)
Abstract:
DCBM10A voltage buffer device provides continuous power within the stipulated time for subsequent load, it’s very important to accurately calculate discharge time. First, through theoretical deduction the capacitor discharge state equation is established. Then SVD singular value decomposition theory is introduced and the theory is used to analyze the equation, and discharge time is determined. And then Marr wavelet and wavelet transform modulus maximum theory are selected respectively to process buffer signal. The two results are analyzed and compared, which embodies SVD theory superiority. Finally experimental platform is built, which demonstrates the effectiveness of this method. This work is supported by National High-tech R & D Program of China (863 Program) (No. 2015AA050101).
Key words:  HVDC transmission project  capacitor discharge time  Hankel matrix  singularity signal  SVD decomposition
  • 1
X关闭
  • 1
X关闭