Model recognition based single-phase earthed faulty line selection method of Petersen coil grounded system
DOI：10.7667/PSPC162117
Key Words:distribution network  fault line selection  model recognition  least square fitting
Author NameAffiliationE-mail
XU Mingming State Grid Henan Electric Power Research Institute, Zhengzhou 450052, China  
GAO Shuping School of Electrical and Control Engineering, Xi’an University of Science and Technology, Xi’an 710054, China  
CHANG Zhongxue School of Electrical Engineering, Xi’an Jiaotong University, Xi’an 710049, China changzhx@163.com 
MA Jianwei State Grid Henan Electric Power Research Institute, Zhengzhou 450052, China  
CHEN Wei Henan EPRI Electric Technology Co., Ltd., Zhengzhou 450000, China  
SONG Guobing School of Electrical Engineering, Xi’an Jiaotong University, Xi’an 710049, China  
Hits: 3080
Download times: 1439
Abstract:A new method of faulty line selection method based on model recognition for Petersen coil grounded system is presented. The equivalent circuit of every line is modeled as capacitance during fault characteristic frequency band. The initial value of capacitance is calculated by transient information through least square fitting. Then capacitance value calculated by the steady-state signal is compared with the initial value. It is found that fault line does not meet the established capacitance model and model error is large; while the sound line is basically in accordance with the established capacitance model and the model error is close to zero. Based on these characteristics, faulty line selection criteria is constructed. This method has a bootstrap characteristic. Simulation and field recording data show that the proposed method is feasible. This work is supported by Science and Technology Project of State Grid Corporation of China “Research of Key Technologies for Fast Handling of Distribution Network Single-phase Grounding Fault Considering Personal Safety Protection”.
View Full Text  View/Add Comment  Download reader