引用本文:何胜华,范必双,夏侯智聪,等.一种新颖的模糊自耦合PI在风力机MPPT控制中的应用[J].电力系统保护与控制,2023,51(9):46-55.
HE Shenghua,FAN Bishuang,XIAHOU Zhicong,et al.A novel fuzzy self-coupled PI for wind turbine MPPT control[J].Power System Protection and Control,2023,51(9):46-55
【打印本页】   【下载PDF全文】   【查看/发表评论】  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被：浏览 7384次   下载 1607次 本文二维码信息
码上扫一扫！
分享到： 微信 更多
字体:加大+|默认|缩小-
一种新颖的模糊自耦合PI在风力机MPPT控制中的应用
何胜华1，范必双1，夏侯智聪2，吴江平2，怀晓伟3
1.长沙理工大学，湖南 长沙 410000；2.国家电力投资集团江西电力有限公司新能源发电分公司，江西 南昌 330000； 3.国家电网湖南防灾科技有限公司(电网输变电设备防灾减灾国家重点实验室)，湖南 长沙 410000
摘要:
针对风速随机性给风能转换系统(wind energy conversion system, WECS)带来的非线性和参数不确定性，提出了一种模糊自耦合PI控制方案用于低风速的最大功率点跟踪。自耦合PI被用来完成基本的转速跟踪，以实现对风力机尖速比的最优化控制。而模糊控制器则被用来获取自耦合PI在不同工作点下的控制参数，以提高系统对风速变化的适应能力。为了验证所提方案的可行性，在Matlab/Simulink搭建的2?MW风能转换系统仿真模型中开展了与传统方法的对比实验。仿真结果表明，相比于传统PI、模糊PI以及GA-PI，所提出方法拥有更佳的转速跟踪性能、更平滑的响应曲线以及更多的电能输出。
关键词:  风力发电  最大功率点跟踪  尖速比控制  自耦合PI  模糊控制
DOI：10.19783/j.cnki.pspc.221384
分类号:
基金项目:国家自然科学基金项目资助(52277077)
A novel fuzzy self-coupled PI for wind turbine MPPT control
HE Shenghua1, FAN Bishuang1, XIAHOU Zhicong2, WU Jiangping2, HUAI Xiaowei3
1. Changsha University of Science and Technology, Changsha 410000, China; 2. New Energy Power Generation Branch, State Power Investment Company Jiangxi Electric Power Co., Ltd., Nanchang 330000, China; 3. State Grid Hunan Disaster Prevention Technology Co., Ltd. (National Key Laboratory for Disaster Prevention and Reduction of Power Grid Transmission and Transformation Equipment), Changsha 410000, China
Abstract:
A fuzzy self-coupled PI control scheme is proposed for maximum power point tracking at low wind speeds in response to the nonlinearity and parameter uncertainty brought about by the randomness of wind speed to the wind energy conversion system (WECS). The self-coupled PI is used to accomplish basic speed tracking for optimal control of the wind turbine tip speed ratio, while the fuzzy controller is used to obtain the control parameters of the self-coupled PI at different operating points to improve the system's adaptability to wind speed variations. To verify the feasibility of the proposed scheme, a comparison with the conventional method is carried out in a simulation model of a 2?MW WECS built in Matlab/Simulink. Simulation results show that compared with conventional PI, fuzzy PI and GA-PI, the proposed method has better speed tracking, a smoother response curve and more power output.
Key words:  wind power generation  maximum power point tracking  tip speed ratio control  self-coupled PI  fuzzy control
  • 1
X关闭
  • 1
X关闭