面向一体化监控系统智能告警高级应用的注入测试系统的测试用例设计

张磐; 郭凌旭; 陈建; 康宁; 马敏杰; 熊静

引用本文:	张磐,郭凌旭,陈建,等.面向一体化监控系统智能告警高级应用的注入测试系统的测试用例设计[J].电力系统保护与控制,2018,46(22):137-142.
	ZHANG Pan,GUO Lingxu,CHEN Jian,et al.Design of test case for injection test system oriented to advanced application of intelligent alarm in integrated monitoring system[J].Power System Protection and Control,2018,46(22):137-142

【打印本页】【下载PDF全文】【查看/发表评论】【EndNote】【RefMan】【BibTex】

←前一篇|后一篇→

过刊浏览高级检索

本文已被：浏览 5360次下载 2501次	码上扫一扫！
分享到：微信更多字体:加大+\|默认\|缩小-
面向一体化监控系统智能告警高级应用的注入测试系统的测试用例设计
张磐¹,郭凌旭²,陈建²,康宁¹,马敏杰³,熊静⁴
(1.国网天津市电力公司电力科学研究院，天津 300384;2.天津市电力公司，天津 300384;3.南京五采智电电力科技有限公司，江苏南京 211106;4.湖北大学物理与电子科学学院，湖北武汉 430062)

摘要:

为了测试和评价一体化监控系统高级应用，特别针对智能告警，在一体化监控系统智能告警注入测试系统中，设计了一套完整的测试用例。通过分析某一故障判别逻辑，形成故障信号的排序原则及故障信号序列模板，按照电压等级和故障类型等信息，构建完整的正向和反向的故障信号序列模板库。采用故障信号序列模板与实际工程SCD中故障信号自动映射技术，形成了具体故障的测试用例。开发了可视化的故障信号序列模板配置模块及故障信号映射配置模块。故障信号序列模板库丰富和积累了智能告警方向的测试知识库，信号自动映射技术减少了不同工程的测试用例配置工作量，提升了测试配置的效率。

关键词: 一体化监控系统智能告警故障信号序列模板库自动映射测试用例

DOI：10.7667/PSPC171618

分类号:

基金项目:国家863课题项目资助(2014AA052003);国家电网公司总部科技项目资助“变电站一体化监控系统应用标准化与评价技术研究”

Design of test case for injection test system oriented to advanced application of intelligent alarm in integrated monitoring system

ZHANG Pan¹,GUO Lingxu²,CHEN Jian²,KANG Ning¹,MA Minjie³,XIONG Jing⁴

(1. State Grid Tianjin Electric Power Company Research Institute, Tianjin 300384, China;2. Tianjin Electric Power Company, Tianjin 300384, China;3. Five-C Smart Power Grid Technology Co., Ltd., Nanjing 211106, China;4. Faculty of Physics and Electronic Technology, Hubei University, Wuhan 430062, China)

Abstract:

In order to test and evaluate the advanced application of the integrated monitoring system and focus on intelligent warning, this paper designs a complete set of test cases for integrated monitoring system smart warning infused test system. It forms arrangement principle of breakdown signal and template for faulted signal sequence via identifying the trouble logic. And it establishes a whole template library for the failure signal sequence from positive and negative directions according to voltage class and fault type. Test samples for specific faults are formed by means of adopting fault signal sequence template and auto-mapping techniques applied in practical engineering SCD. It develops a visual breakdown signal sequence template configuration module and fault signal mapping configuration module. The former enriches and stimulates the test knowledge base for intelligent warning and the latter cuts down the workload for engineering test samples, meanwhile, promotes its efficiency. This work is supported by National High-tech R & D Program of China (863 Program) (No. 2014AA052003).

Key words: integrated monitoring system intelligent warning template library for trouble signal sequence auto-mapping test case

X关闭