IEC 61850应用剖析及其发展探讨

高志远; 黄海峰; 徐昊亮; 倪益民; 窦仁晖; 靳攀润; 曹阳; 张鸿

引用本文:	高志远,黄海峰,徐昊亮,等.IEC 61850应用剖析及其发展探讨[J].电力系统保护与控制,2018,46(1):162-169.
	GAO Zhiyuan,HUANG Haifeng,XU Haoliang,et al.Discussion on applications of IEC 61850 and its development[J].Power System Protection and Control,2018,46(1):162-169

【打印本页】【下载PDF全文】【查看/发表评论】【EndNote】【RefMan】【BibTex】

←前一篇|后一篇→

过刊浏览高级检索

本文已被：浏览 8459次下载 4575次	码上扫一扫！
分享到：微信更多字体:加大+\|默认\|缩小-
IEC 61850应用剖析及其发展探讨
高志远¹,黄海峰¹,徐昊亮²,倪益民¹,窦仁晖¹,靳攀润²,曹阳¹,张鸿¹
(1.中国电力科学研究院，江苏南京 210003;2.国网甘肃省电力公司经济技术研究院，甘肃兰州 730050)

摘要:

作为智能变电站的数字化基础，IEC 61850在促进变电站技术进步的同时，本身在应用中也反映出若干设计上的缺陷。在深入剖析IEC 61850标准现状和应用实践情况的基础上，反思了其成败得失。针对智能变电站的部分发展需求，不再完全局限于标准约束，提出了IEC 61850补充性框架设计思路。提出IEC 61850的变电站设备模型及其相关的服务模型可以简化，变电站配置描述语言需要摆脱低效、庞大的弱点，需要利用特定通信服务映射机制设计新的高效通信协议栈，并增强与调度端的无缝通信能力。最后利用CIM/E语言、电力通用服务协议等成果对IEC 61850进行了补充性的改进设计示例。

关键词: 智能变电站 IEC 61850 面向服务 IEC 标准变电站自动化系统

DOI：10.7667/PSPC161960

分类号:

基金项目:国家电网公司科技项目“基于通用服务协议的主子站网络化接入关键技术及应用研究”

Discussion on applications of IEC 61850 and its development

GAO Zhiyuan¹,HUANG Haifeng¹,XU Haoliang²,NI Yimin¹,DOU Renhui¹,JIN Panrun²,CAO Yang¹,ZHANG Hong¹

(1. China Electric Power Research Institute, Nanjing 210003, China;2. State Grid Gansu Electric Power Company Economic Research Institute, Lanzhou 730050, China)

Abstract:

As a digital basis of smart substation, IEC 61850 has promoted the advancements of the substation technologies. But at the same time, several design defects are also reflected in the applications. Based on in-depth analysis of the status and practical applications of IEC 61850, its advantages and defects are summed up. According to some of the requirements for smart substation development, a complementary architecture for IEC 61850 is put forward, which is no longer confined to the current standard constraints. It is pointed out that, the intelligent electronic device (IED) models of IEC 61850 and its related service models may be simplified, the Substation Configuration Description Language (SCL) needs to get rid of the weakness of low efficiency and hugeness, a new efficient communication protocol stack needs to be designed by using the Specific Communication Service Mapping (SCSM) mechanism, and the seamless communication ability with dispatching ends need to be strengthened. Finally, an improvement design as supplementary protocols for IEC 61850 standard is put forward by using the CIM/E language and the general service protocol for electric power systems.

Key words: smart substation IEC 61850 service-oriented IEC standard substation automation system

X关闭