模块化多电平换流器改进型子模块拓扑仿真研究

李欢; 田新成; 张建坡

引用本文:	李欢,田新成,张建坡.模块化多电平换流器改进型子模块拓扑仿真研究[J].电力系统保护与控制,2016,44(2):95-101.
	LI Huan,TIAN Xincheng,ZHANG Jianpo.Simulating research of improved topologies of modular multilevel converter[J].Power System Protection and Control,2016,44(2):95-101

【打印本页】【下载PDF全文】【查看/发表评论】【EndNote】【RefMan】【BibTex】

←前一篇|后一篇→

过刊浏览高级检索

本文已被：浏览 4958次下载 2522次	码上扫一扫！
分享到：微信更多字体:加大+\|默认\|缩小-
模块化多电平换流器改进型子模块拓扑仿真研究
李欢¹, 田新成², 张建坡¹
1.华北电力大学，河北保定 071001;2.唐山供电公司，河北唐山063000

摘要:

针对模块化多电平换流器高压应用和高电平输出时子模块数量过多问题，研究了堆叠式两电平和多电平输出子模块拓扑特点。在总结不同改进类型子模块拓扑特点基础上，定性比较了各种拓扑在直流侧短路故障时所具有的故障电流抑制能力差异性。针对串联双子模块拓扑，设计了基于全控和半控整流方式的混合充电策略。以改进型拓扑为例，在PSCAD/EMTDC 中搭建了两端有源MMC-HVDC 系统，对不同子模块拓扑的直流侧故障抑制特性以及串联双子模块拓扑启动策略的有效性进行了分析验证。

关键词: 模块化多电平换流器改进拓扑故障电流抑制串联双子模块混合充电

DOI：10.7667/j.issn.1674-3415.2016.02.013

分类号:

基金项目:

Simulating research of improved topologies of modular multilevel converter

LI Huan¹, TIAN Xincheng², ZHANG Jianpo¹

1.North China Electric Power University, Baoding 071001, China;2.State Grid Tangshan Power Corporation, Tangshan 063000, China

Abstract:

Firstly, for the large number of sub module (SM) caused by high voltage applications and high level output of modular multilevel converter (MMC), cascaded two levels (CTL) and multi-level output SM topologies are studied. Secondly, the characteristics of different types of improved SM topologies are summarized and qualitative comparison of their different DC link fault blocking capability is conducted. Then a hybrid self-startup strategy based on full controlled and half controlled rectifier is designed for the serial connected double sub module topology. Lastly, MMC-HVDC with two active terminals in the PSCAD/EMTDC software is built based on these improved topologies, and DC link fault suppressing characteristics of different SM topologies and the startup strategy are analyzed and verified.

Key words: MMC improved topologies fault current blocking serial connected double sub module hybrid charge

X关闭