引用本文:高元生,陈强,熊小伏,等.基于相邻线路拓扑关系的距离保护测量回路 隐藏故障诊断方法[J].电力系统保护与控制,2015,43(14):22-29.
GAO Yuansheng,CHEN Qiang,XIONG Xiaofu,et al.Diagnostic method of measuring loop hidden failure of distance protection based on adjacent lines topological relations[J].Power System Protection and Control,2015,43(14):22-29
【打印本页】   【下载PDF全文】   查看/发表评论  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 4133次   下载 2334 本文二维码信息
码上扫一扫!
分享到: 微信 更多
基于相邻线路拓扑关系的距离保护测量回路 隐藏故障诊断方法
高元生1, 陈强1, 熊小伏2, 周岐杰1, 郑昌圣2
1.国网四川省电力公司达州供电公司,四川 达州 635000;2.重庆大学输配电装备及 系统安全与新技术国家重点实验室,重庆 400030
摘要:
针对距离保护装置测量回路的隐藏故障,提出了一种基于相邻线路网络拓扑关系的诊断方法。以故障持续时间内的线路拓扑关系为基础,分析了简单网络和带有分支线路网络中不同保护装置测量值之间的约束关系,并据此建立了用于诊断的判别式组及其相应的门槛值。通过对判别式组不同计算结果的组合,实现了对含有隐藏故障具体装置的定位。针对不同保护装置测量阻抗值不同步的问题,提出了采用故障稳态时刻测量值的处理方法。利用PSCAD/EMTDC对不同短路相角的故障情况进行了仿真验证,表明了采用故障稳态时刻的测量值能够正确识别出含有隐藏故障的装置。
关键词:  距离保护  隐藏故障  拓扑约束  门槛值
DOI:10.7667/j.issn.1674-3415.2015.14.004
分类号:
基金项目:重庆市科技攻关项目(应用重点)(cstc2012gg- yyjsB90003)
Diagnostic method of measuring loop hidden failure of distance protection based on adjacent lines topological relations
GAO Yuansheng1, CHEN Qiang1, XIONG Xiaofu2, ZHOU Qijie1, ZHENG Changsheng2
1.State Grid Sichuan Dazhou Electrical Power Company, Dazhou 635000, China;2.State Key Laboratory of Power Transmission Equipment & System Security and New Technology, Chongqing University, Chongqing 400030, China
Abstract:
To solve the distance protection measuring loop hidden failure problem, this paper proposes a diagnostic method based on adjacent lines topological relations. Aiming at simple network and network with branch lines, it analyzes measurement values constraint relations among different protection devices in the fault duration. Constraints discriminants and thresholds are deduced, by substituting measure impedance and composing the results, the purpose of positioning failure device can be achieved. According to the problem of protection measure impedance sync issue, it puts forward a processing method by using measure impedance on faults steady moment. PSCAD/EMTDC is used to simulate failure under different short-circuit phases, which proves device within hidden failure could be recognized by using measure impedance on faults steady moment.
Key words:  distance protection  hidden failure  topological constraints  threshold
  • 1
X关闭
  • 1
X关闭