引用本文:李佳,刘天琪,李兴源,等.感应电动机模型和机械转矩参数对暂态电压稳定评估的影响[J].电力系统保护与控制,2014,42(12):19-24.
LI Jia,LIU Tian-qi,LI Xing-yuan,et al.Influence on assessment of transient voltage stability by induction motor model and mechanical torque parameters[J].Power System Protection and Control,2014,42(12):19-24
【打印本页】   【下载PDF全文】   【查看/发表评论】  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被：浏览 5097次   下载 2761次 本文二维码信息
码上扫一扫！
分享到： 微信 更多
字体:加大+|默认|缩小-
感应电动机模型和机械转矩参数对暂态电压稳定评估的影响
李佳1,2, 刘天琪1, 李兴源1, 邢大鹏2, 何笠3
1.四川大学电气信息学院, 四川 成都 610065;2.国网四川省电力公司技能培训中心，四川 成都 610072;3.国网四川省电力公司电力科学研究院，四川 成都 610072
摘要:
基于三阶感应电动机模型，同时考虑机械转矩参数，给出了快速评估法下极限切除时间的计算方法，分析了转子绕组电磁暂态特性和机械转矩参数对极限切除时间的影响。该方法提高了感应电动机模型精度，同时计算更加简便，可用于动态安全评估系统的计算。IEEE30系统仿真结果表明较高的机械转矩次数有利于负荷节点暂态电压稳定，而转子绕组的电磁暂态特性不利于负荷节点的暂态电压稳定，模型精度对极限切除时间的影响小于机械转矩参数的影响。
关键词:  感应电动机模型  机械转矩参数  暂态电压稳定  极限切除时间
DOI：10.7667/j.issn.1674-3415.2014.12.004
分类号:
基金项目:
Influence on assessment of transient voltage stability by induction motor model and mechanical torque parameters
LI Jia1,2, LIU Tian-qi1, LI Xing-yuan1, XING Da-peng2, HE Li3
1.School of Electrical Engineering and Information, Sichuan University, Chengdu 610065, China;2.State Grid Sichuan Technical Training Center, Chengdu 610072, China;3.State Grid Sichuan Electric Power Research Institute, Chengdu 610072, China
Abstract:
Based on three-order induction motor load model and considering different mechanical torque, a method for calculating critical clearing time under rapid assessment is presented. The effect on critical clearing time by rotor winding electromagnetic transient characteristics and mechanical torque parameters is analyzed. The proposed method improves the accuracy of induction motor load model, and the time index can be calculated more simply so that this method can be used in dynamic security assessment system as a computational engine. The simulation result of IEEE30 bus system shows that the power of mechanical torque benefits the transient voltage stability of load nodes, and the electromagnetic transients in rotor winding harm the transiet voltage stability; the effect of model accuracy on critical clearing time is smaller than that of mechanical torque parameters.
Key words:  induction motor model  mechanical torque  transient voltage stability  critical clearing time
  • 1
X关闭
  • 1
X关闭