间隔概念在SCADA系统设计中的应用

邱军旗; 胡玲霞

引用本文:	邱军旗,胡玲霞.间隔概念在SCADA系统设计中的应用[J].电力系统保护与控制,2008,36(2):45-48.
	QIU Jun-qi,HU Ling-xia.Bay applied in the SCADA design[J].Power System Protection and Control,2008,36(2):45-48

【打印本页】【下载PDF全文】【查看/发表评论】【EndNote】【RefMan】【BibTex】

←前一篇|后一篇→

过刊浏览高级检索

本文已被：浏览 4198次下载 2870次	码上扫一扫！
分享到：微信更多字体:加大+\|默认\|缩小-
间隔概念在SCADA系统设计中的应用
邱军旗¹, 胡玲霞²
1.中山供电局, 广东中山 528400;2.中山火炬职业技术学院, 广东中山 528400

摘要:

研究了在SCADA系统中以间隔为单位进行建模的问题。间隔是电力系统中的一个常用单位，它是一系列有操作关联的电器设备的合称，在SCADA系统中以它为单位进行建模，必将使SCADA系统的维护大大简化。提出了以间隔为单位的三种建模方法：搜索所数据表的方法，建立模板信息表的方法和两种方式结合的方法，并分析了各种方法的优缺点。接着分析了在作图时如何实现以间隔为单位进行图形设备关联。最后说明了间隔建模方法在中山SCADA系统中的应用。

关键词: 间隔数据库建模 SCADA CIM

DOI：10.7667/j.issn.1674-3415.2008.02.011

分类号:

基金项目:

Bay applied in the SCADA design

QIU Jun-qi¹, HU Ling-xia²

1.Zhongshan Power Supply Bureau, Zhongshan 528400 China;2. Zhongshan Torch Politechnic,Zhongshan 528400, China

Abstract:

The modeling of the SCADA system , which is based on the unit of bay is discussed in this paper. Bay is composed of a series of associated electric equipments, which is usually used in electronic system. Modeling in bay-level will greatly simplify the maintenance of SCADA system. Three modeling methods, searching SCADA data table, building model information table and unifying the two methods in bay-level are presented with their advantages and disadvantages. Then this paper discusses how to connect the graph equipments when plotting in bay-level. The application of modeling in bay-level in the SCADA system of Zhongshan Power Supply Bureau is illustrated.

Key words: bay database modeling SCADA CIM

X关闭