基于模板的电力保护系统通信规约研究

张艳林<sup>1</sup>; 李绍滋<sup>2</sup>

引用本文:	张艳林,李绍滋.基于模板的电力保护系统通信规约研究[J].电力系统保护与控制,2007,35(22):23-26,32.
	ZHANG Yan-lin,LI Shao-zi.Research on communication protocols based on template in power protection system[J].Power System Protection and Control,2007,35(22):23-26,32

【打印本页】【下载PDF全文】【查看/发表评论】【EndNote】【RefMan】【BibTex】

←前一篇|后一篇→

过刊浏览高级检索

本文已被：浏览 4134次下载 2918次	码上扫一扫！
分享到：微信更多字体:加大+\|默认\|缩小-
基于模板的电力保护系统通信规约研究
张艳林¹, 李绍滋²
1.厦门大学人工智能研究所, 福建厦门 361005;2.厦门大学-北京德威特电力自动化软件联合实验室，福建厦门361005

摘要:

目前国内变电站综合自动化系统中由于不同厂家或同一厂家在不同时期对同一标准规约的实现有所不同，而导致变电站保护系统即使接入使用同一标准规约的产品也要修改程序，这给现场维护带来极大不便。针对上述情况，提出了基于模板的通信规约设计思想，接着以IEC60870-5-103通信规约为例进行了该思想的详细设计，并在我们自主设计的DVP－9000变电站综合自动化软件系统中加以了实现，经过测试，取得了很好的成效性。

关键词: 标准规约规约模板配置文件 103规约

DOI：10.7667/j.issn.1674-3415.2007.22.006

分类号:

基金项目:福建省科技重点项目资助(2006H0037)

Research on communication protocols based on template in power protection system

ZHANG Yan-lin¹, LI Shao-zi²

1. Intelligent Multimedia Technology Lab, Xiamen University, Xiamen 361005,China;2. Electric Power Automation Software Joint Lab, Xiamen 361005, China

Abstract:

In the domestic transformer substation synthesis automated system, according to different factories or same factories in different periods carry out the same standard protocol differently at the present time, which lead to revise the procedure for transformer substation protection system even it has been input products with same standard protocol, brings enormous inconvenience for on-site maintenance. In view of above situation, this paper proposes a new thought on the design for template. Meanwhile, combining IEC60870-5- 103 protocol applying for DVP9000 transformer substation synthesis automated software system, it introduces and implements this idea. After the test, it achieves good effect.

Key words: standard protocol protocol template configuration files 103 protocol

X关闭