An asymmetric cross-parallel high step-up DC-DC converter
DOI:10.19783/j.cnki.pspc.181138
Key Words:interleaved converter  quadratic Boost converter  high step-up
Author NameAffiliation
QIAO Wenzhuan College of Physics Science and Information Engineering, Hebei Normal University, Shijiazhuang 050024, China 
ZHANG Shaoru College of Physics Science and Information Engineering, Hebei Normal University, Shijiazhuang 050024, China
Industrial Energy Saving and Power Quality Control of Collaborative Innovation Center, Anhui University, Hefei 230601, China 
ZHANG Mengmeng College of Physics Science and Information Engineering, Hebei Normal University, Shijiazhuang 050024, China 
ZHAO Zhixiao School of Electrical Engineering, Hebei University of Science and Technology, Shijiazhuang 050018, China 
Hits: 2614
Download times: 1221
Abstract:The traditional DC/DC converter has some shortcomings, such as limited voltage gain and large voltage stress on switching tubes, diodes and other devices. An asymmetric cross-parallel high step-up DC-DC converter is proposed. On the basis of the second type Boost circuit, the switching inductance three-terminal network is introduced to form the asymmetric cross-parallel circuit, which raises the gain of the converter and reduces the voltage stress and current stress on the components. The gain of the converter is further raised by introducing the switching capacitance into the three-terminal gain circuit. The operating modes of the converter under different duty cycle are analyzed in detail, the DC steady-state model of the circuit system is established, and the steady-state voltage gain of the circuit is derived. Finally, the correctness of the scheme is verified by Matlab simulation and experiment results. This work is supported by National Key Research and Development Program of Hebei Province (No. 18214302D and No.16211806D).
View Full Text  View/Add Comment  Download reader